{"product_id":"7-m-m-7x57mm-mauser-standard-tribute-rifle-1949","title":"7 M\/M (7x57mm Mauser) Standard Tribute Rifle - 1949","description":"\u003cp\u003e\u003cspan\u003eThis rifle was acquired out of a collection in Wyoming where the owner had developed some concerns regarding its authenticity. Upon bringing it into our shop, under a detailed examination, we were able to confirm that it is not a factory original rifle, but is a very finely done custom, made to look exactly like a factory rifle. Although this rifle is a near-perfect replica and very difficult to distinguish from a factory-built rifle, we want to be very clear it is a custom rifle.  No doubt it was produced with the intent to fool a buyer into believing it was a rare rifle produced by Winchester. And indeed, the owner of the collection this rifle came from believed it to be authentic when he purchased it. We are being clear here about its origins to ensure the next buyer knows exactly what they are getting. We have discreetly marked the bottom of the barrel to ensure there will be no doubt about its authenticity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNot only is it not a factory original, but based on a few distinguishing characteristics, we think this rifle was made by the same person who made a few other custom rifles we have seen come through the shop. The workmanship on the finishes is excellent, especially the metal, but on a few of the rifles we have found headspace, feeding or extraction issues - the result of some missed tolerances.\u003c\/p\u003e\n\u003cp\u003eThis rifle had a headspace issue, which we corrected by setting the shoulder back a full thread and re-cutting the chamber. As result of this, the forearm barrel screw no longer aligns with the barrel escutcheon. We solved this problem by removing the escutcheon and installing a shortened forearm screw; the screw fills the hole in the stock but does not make contact with the barrel. Visually, this fix is not noticeable unless the stock is removed, but it does allow for full floating of the barrel; in fact, many times we make this change to improve the accuracy of a custom rifle. Setting the shoulder back also slightly changes the fit of the barrel in the stock; there is a slight gap on the forward side of the barrel rear sight boss.\u003c\/p\u003e\n\u003cp\u003eThe receiver and bolt are both marked with serial number 118397, indicating a 1949 manufacture date. The rifle is in NRA excellent (refinished) condition.\u003c\/p\u003e\n\u003cp\u003eThe rifle is possibly unfired as the bore shows no wear, no damage, and no copper fouling. We rate it a 10 out of 10. Borescope verified.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe barrel is a near perfect duplication of the factory standard barrel with a factory-appearing roll stamp. The balance of the rifle is all correct factory parts for a 7 M\/M Standard rifle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis rifle was probably completely re-blued when it was customized, and the finishes are near perfect. The bluing on this rifle grades at 98%, showing almost no wear. The rear sight and the bolt sleeve have a slight purplish coloration. Aside from two very small dings above the logo, and two pin-head sized marks on the trigger guard, there are no other notable dings or other damage to the metal. \u003c\/p\u003e\n\u003cp\u003eThe Monte Carlo stock is in excellent condition. Aside from a few light handling marks, it is without flaws. The checkering is exceptionally clean and crisp, without any flat spots or dings.  The steel butt plate shows no wear and is in excellent condition.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: This item can only be shipped directly to you if you are an FFL or C\u0026amp;R license holder. If this is not the case, the item must be shipped to an FFL holder near you who can complete the transfer. If needed, we are happy to assist you in locating an FFL holder near you who can assist in this way.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis item is only available for shipment to US addresses.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cinput id=\"idg-io-safe-browsing-enabled\" type=\"hidden\"\u003e\u003c\/p\u003e","brand":"Winchester","offers":[{"title":"Default Title","offer_id":52961835909419,"sku":"118397","price":3699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1321\/6167\/files\/IMG_5534_eb46e6ec-4bd9-4d52-8096-b7dd0235b445.jpg?v=1788285043","url":"https:\/\/pre64win.com\/products\/7-m-m-7x57mm-mauser-standard-tribute-rifle-1949","provider":"pre64win.com","version":"1.0","type":"link"}