Complete Pre-64 Winchester Model 70 Action
Complete Pre-64 Winchester Model 70 Action
Complete Pre-64 Winchester Model 70 Action
Complete Pre-64 Winchester Model 70 Action
Complete Pre-64 Winchester Model 70 Action
Complete Pre-64 Winchester Model 70 Action
Complete Pre-64 Winchester Model 70 Action
Complete Pre-64 Winchester Model 70 Action
Complete Pre-64 Winchester Model 70 Action
Complete Pre-64 Winchester Model 70 Action

Complete Pre-64 Winchester Model 70 Action

$1,699.00

Complete Pre-64 Winchester Model 70 rifle action - the foundation for a custom rifle build. 

We build our actions with all factory correct parts, per Winchester Cartridge Group:

  • Group I
    • Factory chamberings: .22 Hornet
    • Bolt Face: 0.356"
    • Bolt Throw: 2.98"
    • Max unfired cartridge length: 1.75"
  • Group II
    • Factory chamberings: .250-3000 Savage & .35 Remington
    • Bolt Face: 0.475"
    • Bolt Throw: 3.93"
    • Max unfired cartridge length: 2.7"
  • Group III
    • Factory chamberings: .220 Swift &.300 Savage
    • Bolt Face: 0.485"
    • Bolt Throw: 4.06"
    • Max unfired cartridge length: 2.83"
  • Group IV
    • Factory chamberings: .243, .308 & .358 Win, & .257 Roberts
    • Bolt Face: 0.485"
    • Bolt Throw: 4.06"
    • Max unfired cartridge length: 2.83"
  • Group V
    • Factory chamberings: .270 Win, 7mm & .30-06 Springfield
    • Bolt Face: 0.485"
    • Bolt Throw: 4.58"
    • Max unfired cartridge length: 3.35"
  • Group VI - .264, .300, 338 & .458 Win Magnum
    • Factory chamberings: .270 Win, 7mm & .30-06 Springfield
    • Bolt Face: 0.550"
    • Bolt Throw: 4.58"
    • Max unfired cartridge length: 3.35"
  • Group VII - .300 & .375 H&H Magnum
    • Factory chamberings: .270 Win, 7mm & .30-06 Springfield
    • Bolt Face: 0.550"
    • Bolt Throw: 4.58"
    • Max unfired cartridge length: 3.7"

Your action will be built once you place your order, and built to your specifications. Regardless of which action you order, we will contact you and review your exact needs and the parts for your build before we begin. 

Your action will be built from first-quality, original Winchester parts which have been inspected, properly matched, and assembled to be a worthy foundation for your custom rifle build. Bolts and receivers will generally be factory matched with matching serial numbers. Unless otherwise specified, parts and all finishes will be factory original. Parts will grade in NRA very good to NRA excellent condition - this means parts may show some bluing wear, but there will not be problematic metal wear, pits, nicks, gouges or other damage to the metal.

pre64win.com actions are 100% complete, including everything needed to finish a rifle, other than a barrel and stock. Included parts are:

  • Post-war (tapered tang) receiver
  • Bolt housing
  • Bolt safety sleeve
  • Trigger group
  • Magazine box
  • Magazine follower
  • Magazine spring
  • Extractor ring
  • Extractor
  • Firing pin
  • Firing pin spring
  • Firing pin spring retainer
  • Ejector
  • Bolt stop
  • Trigger guard
  • Floor plate
  • Action screws

Upon request, we will blueprint your action at no additional cost. Our blueprinting is comprehensive, including bolt & receiver faces, lugs, threads, etc).  Read more about our blueprinting process here:  https://pre64win.com/products/action-blueprinting

Action upgrades are available, including:

  • Pre-war or transition receiver 
  • Custom trigger
  • Refinishing, including rebluing, Duracoat & Cerakote finishes
  • Bolt jeweling
  • Scope mounts (installed & lapped)
  • etc.

NOTE: This item can only be shipped directly to you if you are an FFL or C&R license holder. If this is not the case, the item must be shipped to an FFL holder near you who can complete the transfer. If needed, we are happy to assist you in locating an FFL holder near you who can assist in this way.

This item is only available for shipment to US addresses.